top of page
How to make a BitBag:

Step One:

Cut your finished embroidery 5 inches wide by 20 inches long (you can cut it narrower if you want a narrower bag).

BitBag step one.JPG

Step Three:

Put embroidery and lining right sides together and sew around the entire perimeter with a 1/4" seam allowance, leaving a 4-inch opening on one side.

BitBag step three.JPG

Step Two:

Lay your cut embroidery on top of the lining fabric and cut the lining to be the same size as the embroidery.

BiBag step two.JPG

Step Four:

Turn embroidery inside out through the opening, using a chopstick to gently turn corners. Press.

BitBag Step four.JPG

Step Five:

On each end, stitch a line 1/2 inch from the top edge and then another line 1/2 inch down from the first line. Do this on both ends. This will be your casing.

BitBag step six.JPG

Step Six:

Now, fold bag in half and sew with an 1/8 inch seam allowance on each side, starting at the bottom edge of the casing and continuing to the fold.

BitBag step seven.JPG

Step Seven:

Open up the casing by slitting the stitches in between the casing seam lines with a seam ripper.

Seven a.JPG

Step Eight:

Using some of your leftover embroidery floss, make two 18 inch braids and thread them through each side of the bag, one from one side and one from the other so that the bag will close snugly when the braids are pulled together.

Step eight.JPG

Step Nine:

Enjoy your beautiful little bag! You can use it for cosmetics, as a lavender sachet, to keep art supplies in, or as a bag for storing small items like jewelry or headphones when you travel. They also make excellent gifts.

Step nine.JPG
bottom of page